600

It's done.

Remove small metal sheet screws from the bottom of the molding between tail lights. Remove also metal sheet screws hidden under trunk rubber seal too. They are in the same position as the lower ones just on the oter side of the molding. Unscrew license plate lamps. Carefully remove the chrome molding. Remove the tail lights by removing four plastic nuts and later four nuts holding the tail light plate through the rear metal sheet. Expect some rust ... 

600 #796 (1967 US version)

300SEL 6.3 #1285 (1969 EURO version)

300SEL 6.3 #5346 (1971 US version project)

Hello.

I'm trying to remove right tail light as the plastic is cracked and need replacement. I have removed all four bolst that are holding the tail lamp in place but it seems that a chrome trim beetween the tail lights need to be remove too. I already removed all metal sheet screws that are located from bellow of the trim but the trim is still stuck in place.

Is thre some special trick to remove it?

Is there some documentation about this tasks? There is nothing about it in 600 worshop manual.

Regards

Filip

600 #796 (1967 US version)

300SEL 6.3 #1285 (1969 EURO version)

300SEL 6.3 #5346 (1971 US version project)